SGM Technology for Lighting
GB
User’s Manual 1.00
Synthesis Wash 700
- 28 -
Wireless
Synthesis Spot is the first fixture worldwide to be fitted with the DMX
Wireless connection as standard. It uses atechnology based on the idea of
GSM, with a radius over 500 meters. It has been widely tested in
environments with WiFi, bluetooth, GPRS-UMTS signals, with excellent
results.
To enable the wireless communication proceed as follows:
Synthesis has two menu for the: 1-WIRELESS LOG OFF and 2-
WIRELESS.
The procedure to activate the wireless communication is very easy:
1.
Enter theLOG OFF menu and confirm the SET option. This function
disables all the communications previously activated.
2.
Set the WIRELESS menu on ON. This will enable a new
communication.
3.
Press the LOG key on the Transmitter to connect the receiver located
on the fixture.
Wireless logoff
This function allos to disable all the wireless communication previously
activated.
To enable the LOGOFF, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “WIRELESS LOGOFF” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to confirm the SET option.
5.
At this point Synthesis is set for a WIRELESS communication.
Wireless exit
This function allows to enable or disable the wireless signal exiton the DMX
OUT port:
1.
Connect Synthesis to the power supply, wait that the reset operations
are completed.
2.
Use the UP/DOWN keys to search the “WIRELESS EXIT” menu.
3.
Press “Enter” to confirm. The message on the display will start
flashing.
4.
Use the UP/DOWN keys to select ON if you want to enable the
wireless signal exit on the DMX OUT port or OFF if you want to disable
it, confirm the SET option.
WIRELESS EXIT
WIRELESS
WIRELESS LOGOFF
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
