GB
SGM Technology for Lighting
Synthesis Wash 700
User’s Manual 1.00
- 29 -
Pan/Tilt movement resolution
This function allows to define the movement resolution (16 or 8 bit). The
difference is in the number of steps in which the range of head movement is
divided.
In high res. (16bit) mode, 530° ofl pan and 250° of tilt are divided into
65.536 steps, ensuring very smooth precision even at very low speed. In
low res. (8 bit) mode the number of the steps is 256, which nevertheless
allow precise movement. The change from high res. into low res. reduces
the number of channels.
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “Pan Tilt Res” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the required resolution.
5.
Press Enter to confirm.
Speed Control
There are two ways to control the speed with which a fixture moves from a
static position into another. These are known with the names of “TRAKING
contol” and “VECTOR control” and are determined by the presence of the
Pan/Tilt Speed channel.
In TRACKING mode the speed is determined by the cross-fade time set on
the console.
In VECTOR mode the speed is set by the Pan7Tilt Speed channel directly, the
cross-fade time in the consol has to be 0.
To modify the settings, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “SPEED CONTROL” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the required control speed.
5.
Press Enter to confirm.
Lamp power
This Function allows to set the lamp power at 100% (BOOST), at 95%
(NORMAL) or at 90% (SAVING).
To enable this function please proceed as follows:
1.
Connect Synthesis Wash to the power supply, wait that the RESET
operations are completed.
2.
Use the UP/DOWN keys to search the “LAMP POWER” menu.
3.
Press“Enter”to confirm. The message on the display will start flashing.
4.
Use the UP/DOWN keys to select the lamp power desired.
5.
Press “Enter” to confirm the modification.
LAMP POWER
PAN TILT RES
SPEED CONTROL
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
