SGM Technology for Lighting
GB
User’s Manual 1.00
Synthesis Wash 700
- 30 -
Remote control lamp ignition
Operators can decide if the ignition of Synthesis is to be controlled from a
lighting console or be automatic.
To access this function, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “LAMP CONTROL” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the option desided.
5.
Press ENTER to confirm.
Remote control of fixture reset
Using this menu, it’s possible to decide whether to reset the fixture via
remote control or not.
To enable this function, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “RESET CONTROL” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the option desided.
5.
Press ENTER to confirm.
Control of the acceleration of movement speed
Movement can be optimized by changing the speed (SPEED) and acceleration
(ACCEL) parameters, obtaining smooth fast or slow movements as required.
To optimize movement, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “SPEED”or “ACCELLERATION”
menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the option desided.
5.
Press ENTER to confirm.
LAMP CONTROL=DS
RESET CONTROL
ACCELLERATION=FAST
SPEED=100%
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
