GB
SGM Technology for Lighting
Synthesis Wash 700
User’s Manual 1.00
- 31 -
Display brightness
Operators can select one of the brightness levels available for Synthesis
display, which can be standard or very low. This option is intended for
theatre and television use, where excessive brightness can be troublesome.
To change display brightness:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “BRIGHTNESS” menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the option desided.
5.
Press ENTER to confirm.
Display reading position
When the fixture is mounted “upside down” on a structure, operators can
turn the display through 180°, thus greatly facilitating the reading of the
menus on the display.
To change the reading position, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “DISPLAY FLIP”menu.
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the option desided.
5.
Press ENTER to confirm.
6.
Another rapid way to modify the display reading position is to press
for some seconds the UP/DOWN keys at the same time.
Dmx delay
This allows to set for how many seconds the fixture’s last operation settings
are maintained when the DMX signal is missing. This function is
indispensable in those cases in which there is an accidental DMX failure.
To set the required time, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “DMX DELAY” delay
3.
Press ENTER to confirm. The message on the display will start to
flash.
4.
Use the UP/DOWN keys to select the option desided. If
UNL(unlimited) value is set, the fixture keeps the last operating
condition valid independently from the time of missing DMX.
5.
Press ENTER to confirm.
BRIGHTNESS=40%
DISPLAY FLIP
DMX DELAY= UNL
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
