SGM Technology for Lighting
GB
User’s Manual 1.00
Synthesis Wash 700
- 34 -
Temperature
This menu allows to display the internal temperature detected in many
points of the fixture and measured both in Celsius and Fahreneit degrees.
Thanks to a sophisticated software, Synthesis is able to activate internal
projections with the aim of avoiding overheating. The internal temperature
are kept fixed through the fans electronic control and the lamp power.
To check the internal temperature, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find the “TEMPERATURE” menu.
3.
Press “Enter” to confirm.
4.
Use UP/DOWN keys to select the temperature to be checked.
5.
Press “Enter”to get out from the menu.
Version
Only for reading, this menu allows to check the information on the
microprocessors software versions used on the fixture.
To check the software version, proceed as follows:
1.
Connect Synthesis to the power supply, wait till it has completed
reset operations.
2.
Use the UP/DOWN keys to find “VERSION”menu.
3.
Press “Enter”to confirm.
4.
Use UP/DOWN keys to visualize the software installed on the
microprocessors.
5.
Press “Enter” to exit the menu.
TEMPERATURE
VERSION
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
