GB
SGM Technology for Lighting
Synthesis Wash 700
User’s Manual 1.00
- 35 -
3.6
Error Messages
Error Messages
Description
NO SIGNAL
No signal on DMX input.
SIGNAL ERROR
Signal on DMX input disturbed.
PAN COM FAIL
The Processor-in does not receive data by the processor pan board.
TILT COM FAIL
The Processor-in does not receive data by the processor tilt board.
GOBO COM FAIL
The Processor-in does not receive data by the gobo-color processor
board.
ZOOM COM FAIL
The Processor-in does not receive data by the zoom-focus processor
board.
CMY COM FAIL
The Processor-in does not receive data by the CMY processor board.
HEAD COM FAIL
The Processor-in does not receive data by the head fans processor board.
BASE COM FAIL
The Processor-in does not reveive data by the ballast.
POWER COM FAIL
The Processor-in does not reveive data by the pfc.
PAN COM ERROR
The Processor-in receives data by the processor pan board but the
communication is disturbed (receiving data failure).
TILT COM ERROR
The Processor-in receive data by the processor tilt board but the
communication is disturbed (receiving data failure).
GOBO COM ERROR
The Processor-in receive data by the gobo-color processor board but the
communication is disturbed (receiving data failure).
ZOOM COM ERROR
The Processor-in receive data by the zoom/focus processor board but the
communication is disturbed (receiving data failure).
CMY COM ERROR
The Processor-in receive data by the CMY processor board but the
communication is disturbed (receiving data failure).
HEAD COM ERROR
The Processor-in receive data by the head fans processor board but the
communication is disturbed (receiving data failure).
BASE COM ERROR
The Processor-in receive data by the ballast but the communication is
disturbed (receiving data failure).
POWER COM ERROR
The Processor-in receive data by the pfc but the communication is
disturbed (receiving data failure).
GOBO FAN FAIL
The fans of the gobo-color processor board are not working.
LAMP FAN FAIL
The rear head fans are not working.
LAMP
OVERTEMPERATURE
The temperature of the head rear side, where the lamp is located, is too
high.
LAMP TEMPERATUR
FAIL
The temperature of the head rear side, where the lamp is located, is not
correctly detected as the connection with the temperature sensor is
failed.
BASE TEMPERATUR
FAIL
The temperature of the ballast is not correctly detected as the connection
with the temperature sensor is failed.
POWER TEMPERAT
FAIL
The temperature of the pfc is not correctly detected as the connection
with the temperature sensor is failed.
LOW BATTERY
The processor-in has been powered without power supply but through the
battery, and the battery is low charged.
POWER OVERVOLTAGE
The pfc does not power the fixture because it detects a too high tension
on the mains.
POWER
OVERTEMPERATUR
The pfc does not power the fixture because it detects a too high
temperature on the board itself.
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
