SGM Technology for Lighting
GB
User’s Manual 1.00
Synthesis Wash 700
- 36 -
4
M
AINTENANCE
Ordinary Maintenance
Synthesis is internally fitted with three independent modules and this grants more speed in case of
technical operations or maintenance service. Synthesis head was designed according to a totally new
concept: this has enabled all the fixture’s optical functions to be divided in three modules.
Each module is independent from the others from the point of view of electronics and mechanics, and can
be extracted by removing two quarter-turn screws and 4-pin connector.
_ The first module contains: The CMY CTO dimmer
_ The second module contains: 2 gobo wheels, 1 color wheel, animation wheel, Iris diaphragm
_ The third module contains: focus-zoom, shutter, prisms and additional lenses, frost.
Important :
If functions are tested without one or more head modules, it is
recommended to do it for a short time, as the absence of the modules can
cause an insufficient internal ventilation which, combined with the
exposition to the ultraviolet rays and the fixture’s heat, could damage the
mechanical components.
You should clean the fixture on a regular basis. In accordance with the
environment in which it is installed, the unit needs a different maintenance
service as dust, dirt, smoke (either cigarettes and fog fluid) can accumulate
and cause malfunctioning. A general check should be done at every lamp
replacement (750 hours).
Do not submerse in liquid!
Servicing should only be conducted by qualified technicians and not by
the user. If any liquid has been spilled on or into the fixture, contact SGM
Technical Support before attempting to service the fixture.
Exterior Surfaces:
To clean the exterior surfaces proceed as follows:
Wipe with a soft tissue or use a small vacuum to remove any builtup dust and dirt.
For stubborn substances, use any product of all-purpose Industrial Strength Cleaner/Degr
Interior Surfaces:
To clean the interior surfaces proceed as follow:
To clean dichroic filters, glass texture and optical components such as ZOOM lens and dichroic reflector,
use a soft lent-free polyeter cloth with ethyl alcohol. Dichro Gobos: Dampen a soft cloth with isopropyl
alcohol or acetone. Gently wipe the surface of the glass. Handle the gobo by the edges (same as handling a
CD). Do not touch the surface of the pattern because the oils from your hands can degrade the patterns.
www.audiovias.com
Summary of Contents for Synthesis Wash 700
Page 47: ...www audiovias com...
