03
6. Preparations: clean up the surface of the material to be transferred, attach the transfer paper to the surface
of material to be transferred, fix it using the high temperature tape, and keep the front side of the material up.
Rotate the “adjustment hand wheel” to adjust the mould height in the event of excessive or inadequate pressure.
7. Tips for poor pattern transfer printing:
Faded color: this is caused by low temperature, uneven pressure, or short transferring time. Blurry pattern: this is
the result of over extension of ink due to excessive transferring time.
Lusterless pattern surface: this is caused by overpressure or excess temperature. Partially blurry pattern: this is
attributed to the uneven heat distribution in the heat pressing area.
Scar on the pattern: this is caused by excess heat pressing time. Different color shades: this is the result of uneven
pressure, irregularity, or uneven transfer coating.
Transfer paper adhesion: this is due to overtemperature or improper transfer coating.
