Page 2 of 2
Asbestos Clearance Sampling
When sampling for Asbestos in this fashion, it is recommended that you ground your cassette to
remove the possibility of static during your sampling event. SGS Galson has provided a clamp and a
stripped grounding wire for this use
(both must return to SGS)
.
Set Up
:
Simply place the cassette inside the clamp and with the provided tool, tighten the clamp until secure
around the cassette. Slide one stripped end of the wire under the clamp (as shown above) and attach the
other end to your chosen ground source.
Clean Up
:
When complete be sure to turn off the pump first, then loosen the clamp and remove the wire. Close
your cassette to secure your sample and place both the clamp and wire back in the original packaging.
Shipping:
When shipping your samples back to SGS Galson,
DO NOT UTILIZE PACKING FOAM
. Foam
such as packing peanuts could cause static during shipping and effect your sample.
PUMP-FORM-96 Ver:4 Appr/Eff Date:01/10/2020 - 01/10/2020 Approved By: CPIERCE
