PAGE 15
PAGE 14
IMPACT WRENCH OPERATING INSTRUCTIONS
1. Lubricate the tool before operating. See “CARE AND MAINTE-
NANCE” section for oiling instructions.
2. Make sure that the impact socket has been securely fitted onto the
tool. (See Figure 3)
3. Remove the air cap from the tool air inlet and connect the air supply
hose to the tool. Set the air pressure at 90 PSI. (See Figure 4)
4. Push forward the throttle lever block and press down on the throttle
lever. How far the throttle lever is pressed determines the tool rota-
tion speed. (See Figure 5)
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
IMPACT WRENCH OPERATING INSTRUCTIONS
WWW.SGS-ENGINEERING.COM
