PAGE 3
PAGE 2
1. Button Switch
2. Outlet Valve
3. Air Tank
4. Wheels
5. Fan Cover
6. Pressure Gauge
7. Regulating Valve
8. Handle
Model
SC50VT
Power
1.5 kW / 2 HP
Voltage
230 V @ 50 Hz
Motor Poles
2 P
Rated Speed
3200 rpm
Delivery
6.2 cfm
Discharge Pressure
8 bar / 116 psi
Tank Capacity
50 L
Dimensions
360 x 330 x 1000 mm
Net Weight
27 kg
Noise Specification
LWA 95 dB
WARNING SYMBOLS
READ THIS INSTRUCTION MANUAL CAREFULLY
BEFORE OPERATING OR ADJUSTING THE
COMPRESSOR.
Risk of electric shock. The compressor must be
disconnected from the mains supply before main-
tenance or removing any covers. Do not use in a
damp environment.
Risk of accidental start-up. The compressor could
start automatically in the event of a power cut and
subsequent reset. Do not carry the compressor
while it is connected to the power source, or when
the tank is filled with compressed air.
This compressor contains surfaces which may reach
a high temperature during operation. Never
operate with the motor housing removed.
Air and condensation water can burst from the
compressor when the drain plug is removed.
Wear safety goggles and ear protectors when
using this compressor.
This compressor produces a high sound level dur-
ing operation. Ear protection should be worn.
MAIN COMPONENTS
WWW.SGS-ENGINEERING.COM
