PAGE 3
PAGE 2
1. Pressure switch
2. Regulator
3. Output pressure gauge
4. Tank pressure gauge
5. Safety valve
6. Return valve
7. Drain cock
8. Feet
9. Air reciever
10. High pressure pipe
11. Pump
12. Shroud
Model
SC8H
Power
1 kW / 1.1 HP
Voltage
230 V @ 50 Hz
Motor Poles
2 P
Rated Speed
3450 rpm
Delivery
5.5 cfm
Discharge Pressure
116 psi / 0.8 MPa
Tank Capacity
8 L
Dimensions
510 x 250 x 510 mm
Net Weight
16 kg
Noise Specification
LWA 97dB
WARNING SYMBOLS
READ THIS INSTRUCTION MANUAL CARE-
FULLY BEFORE OPERATING OR ADJUSTING
THE COMPRESSOR.
Risk of electric shock. The compressor must
be disconnected from the mains supply before
maintenance or removing any covers. Do not
use in a damp environment.
Risk of accidental start-up. The compressor
could start automatically in the event of a
power cut and subsequent reset. Do not carry
the compressor while it is connected to the
power source, or when the tank is filled with
compressed air.
This compressor contains surfaces which may
reach a high temperature during operation.
Never operate with the motor housing re-
moved.
Air and condensation water can burst from the
compressor when the drain plug is removed.
Wear a safety goggles and ear protectors
when using this compressor.
This compressor produces a high sound level
during operation. Ear protection should be
worn.
MAIN COMPONENTS
WWW.SGS-ENGINEERING.COM
