background image

PAGE 15

PAGE 14

MAINTENANCE SCHEDULE

Item

Daily

First 

month or 

20 hours

Every 

100 

hours

Every 

500 

hours

Every year 

or 1000 

hours

Check and refill with diesel

Yes

Check and refill with engine oil

Yes

Check for oil leakage

Yes

Check and tighten fastening 
parts

Yes

Check and tighten head bolts

Yes

Replace engine oil

Yes, 

First oil 
change

Yes

Replace engine oil filter

Yes

Replace air filter

Yes

Replace fuel filter

Yes

Check Fuel injection pump

Yes

Check injector nozzle

Yes

Check fuel pipes

Yes

Adjust clearance of intake and 
exhaust valves

Yes – 

First time

Yes

Grind intake/exhaust valves

Yes

Replace piston rings

Yes

Check battery condition

Yes

Check carbon brushes and slip 
rings

Yes

TROUBLESHOOTING

Problem

Possible fault/cause

Remedy

The Diesel engine 
will not start

The governer lever is not at 
START position

Set lever to START position

Emergency STOP button 
activated(depressed)

Re-set emergency STOP but-
ton

Insufficient fuel

Refill with fuel

Fuel injection pump does not 
deliver fuel or delivers insuffi-
cient fuel

Remove the injector pump and 
have it tested

Check the engine oil level

The specified oil level should 
be to the upper lever

The injector has severe carbon 
build-up

Clean the injector

The start motor turns slowly

Check battery performance 
and all connections

The battery is flat

Charge or replace with a new 
one

The generator 
is not producing 
power

Main breaker switch has not 
been turned ON

Turn the main breaker to the 
ON position

Alternator brushes worn

Replace the brushes

The contact in the socket is not 
good

Make sure plugs are fully in-
serted into sockets

The rated sped is too HIGH or 
too LOW

Adjust engine speed to pro-
duce 52 Hz with no load

AVR is damaged

Replace AVR

WWW.SGS-ENGINEERING.COM

Summary of Contents for SDG8000SELR











Reviews: