PAGE 2
INSPECTION BEFORE EACH USE
Before each use a visual inspection shall be made for abnormal
conditions such as cracked welds, damaged, bent, worn, loose or
missing parts.
This jack should be inspected immediately if it is believed to have been
subjected to an abnormal load or shock. Owner/operators should be
aware that repair of this jack requires specialised equipment and
knowledge.
SPECIFICATION
MAXIMUM CAPACITY
2000KG
RETRACTED HEIGHT
70MM
MAXIMUM HEIGHT
500MM
WARNING
• Read and understand all warnings and instructions prior to use.
• Do not overload this jack beyond its rated capacity.
• This jack is a lifting device only.
• This jack is designed for use on hard level surfaces only.
• The load must be supported by jack stands once raised.
• Do not dolly or move the vehicle while it is on the jack.
• Lift only on areas as specified by the vehicle manufacturer.
• Only attachments and/or adaptors supplied by sgs shall be used.
• No alterations to the jack shall be made.
• Failure to heed these warnings may result in damage to the jack
and/or failure resulting in personal injury or property damage.
• Inspect the jack before each use.
WWW.SGS-ENGINEERING.COM
