150 lb. Shell Base w/ Wheels
250 lb. Shell Base
REQUIRED TOOLS LIST (not included):
Masking Tape
Pre-mixed "High Early Strength Concrete"
(with aggregate/pebbles)
Wheelbarrow
Hoe
Standard Spade/Shovel
Carpenter's Level
Large Blade Screw Driver
150/250 LB SHELL BASE KIT
INSTALLATION MANUAL
1
Please thoroughly read this installation manual before installing the Paraflex Mount System, and before assembling and operating the
Paraflex Umbrella. The Warranty does not cover damage caused by incorrect installation, wind, or wrongful use of the product. All
users must be properly trained in operation and wind guidelines.
Once installed, always use COMMON SENSE WIND GUIDELINES: If it is too windy to be outside enjoying the day, it is best to
lower/collapse the Umbrella Frame w/ Fabric Canopy. It is also important to keep it lowered/collapsed when unattended. See
manufacturer's limited warranty on page 2.
A
COMPONENTS LIST & REQUIRED TOOLS
1X PARAFLEX
150 LB or 250 LB SHELL BASE (B1)*
Box A
4X - 3/8" x 1" FLAT HEAD MACHINE SCREW (B2)
4X CONCRETE STUD (B3)
Box A
1X PARAFLEX SPIGOT (S1)
Box B
*Note: These instructions are for filling either the 150 LB or 250 LB Shell Base with cement.
