ShadeFX Installation Guide
13
REV
. 0
3/2
021
v.
Pre-drill holes on marked locations:
Concrete: use concrete drill and 5/16” concrete drill bit
Wood: use regular drill and #2 Robertson (Square) drive
vi.
Mount base plate/post assembly to the ground using the predrilled holes and the provided fasteners.
Concrete: use a high torque drill and a 7/16” socket bit
If the fasteners are too difficult for the drill to tighten use a socket wrench and
the 7/16” socket bit and tighten the fasteners manually.
Wood: use a regular drill and #2 Robertson (square) bit
vii.
For Concrete Base only:
Slide the post skirts over the posts so that they cover the baseplates.
