ShadeFX Installation Guide
14
REV
. 0
3/2
021
Step 2: Assembling the structure
In Step 2, you will assemble the structure that supports the canopy by attaching the arm to the post, attaching the rotation
plate to the track supporting beam and mounting the track supporting beam to the posts. Step 2 is constant across all
three base options.
Attaching the Arms to the Post
i.
The cut faces (see below) should be facing each other when installed on posts. Ensure the arms are
angled upwards when installing.
Secure arms in place by installing washers (x4 per arm) and 3/8”-16 hex nuts (x4 per arm) from inside
the posts.
“Cut face”
“Cut face” facing inwards
