ShadeFX Installation Guide
7
REV
. 0
3/2
021
Hardware
Hardware is dependent on the number of units and base option selected. Hardware is categorized into four
groupings: general hardware, base assembly hardware, structure assembly hardware and track assembly
hardware.
General Hardware
A Removable Canopy Handle to extend and retract the canopy is included with each order. Gravity Clips “G-Clips”
are also included with every canopy to attach the canopy assembly to the track assembly. The number of G-Clips
is dependent on track length. Quantities listed below are on a
per canopy basis.
Item
Quantity Per Canopy
Drawing
Removable Canopy Handle*
x1
Gravity Clip “G-Clip”
x10 (8’ Track Length)
x12 (10’ Track Length)
x16 (12’ Track Length)
x18 (14’ Track Length)
x20 (16’ Track Length)
*Only one handle will be provided per order
Base Assembly Hardware
Base assembly hardware is dependent on the type of base selected and number of canopies purchased.
Quantities listed below are on a per post basis.
Concrete Base Hardware
Item
Quantity Per Canopy
Drawing
3/8” x 5” LDT Screw Anchor
x4
3/8”x16 x 1” Flat Socket Cap
Screw
x8
