Depending on its state, the CLK2 output
[5]
produces an
alternative clock signal to CLK1. It can be set through the
CLK2/EXT button
[E]
to :
• Not be affected by the swing function (CLK2 LED off)
• Not respond to the transport section (CLK2 LED on)
• Both of the above (CLK2 LED blinking).
Second output
Turning the Swing potentiometer
[D]
adds shuffle to the clock
signal. This allows to obtain a feel between binary and ternary,
as performed by jazz musicians. When the potentiometer is
turned fully clockwise, the module puts out a triplet clock.
Swing
The module works with a TRS MIDI
cable for which two standards exist.
The two jumpers on the back of the
module select which standard is used.
Placing them horizontally sets the
module to TRS MIDI A standard, and
vertically to TRS MIDI B.
MIDI connectivity
JP1
JP2
JP1
JP2
TRS MIDI
A
TRS MIDI
B
