High-Flying
HF-LPT120 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 26 -
Figure 19.
AP Interface Debug Connection
3.2.3.
Default Parameter Setting
Default SSID: HF-LPT120;
Deault security mode: open,none;
User UART parameter setting:115200,8,1,None;
Default network parameter setting:TCP,Server,8899,10.10.100.254;
Module IP address: dhcp,0.0.0.0,0.0.0.0,0.0.0.0;
3.2.4.
Module Debug
PC1 open ―CommTools‖ program, setting the same serial port parameters with HF-LPT120 module
and open serial port connection.
Figure 20.
―CommTools‖ Serial Debug Tools
PC2 open ―TCPUDPDbg‖ program, and create a new connection. If HF-LPT120 configured as Server
mode, ―TCPUDPDbg‖ Tools shall create ―Client ―mode connection. Or otherwise, create a ―Server‖
mode connection.
Figure 21.
―TCPUDPDbg‖ Tools Create Connection
Then setting the TCP/UDP connection parameters. Default as following:
