Pre-Operation Check – Tires
To ensure the maximum performance, longer durability and safe operation, always check and adjust
the tire pressure before operating your scooter. 22 psi front, 29 psi rear, add 5 psi to rear with load.
NOTE:
Tire pressure should be checked and adjusted when tire temperature equals the ambient air
temperature. Tire pressure must be adjusted according to the total weight of cargo, rider, passenger,
accessories, and vehicle travel speed. Refer to the tire side walls for proper inflation pressure
information. Make sure the total weight of the cargo, rider and passenger does not exceed the
maximum load limit of your scooter. Operating an overloaded scooter could cause the tire to rupture,
accidents and injuries.
Proper loading affects several characteristics of your scooter, such as handling, braking, acceleration,
and safety. Do not carry loosely packed items that can shift during travel. Securely pack your
heaviest items close to the center of your scooter and distribute the weight evenly from side to side.
Properly adjust the suspension to your load and check the condition and pressure of your tires.
Tire Inspection
Always check the tires before operating your scooter. Contact an authorized dealer if the center tread
depth reaches the limit as shown below. If the tire has a nail or glass fragments in it or if the sidewall
is cracked, have the tire replaced immediately.
Minimum Tire Tread Depth:
FRONT: 1.5 mm
Rear: 2.0 mm
