OPERATION
Starting an Engine
-
Park before starting with center stand.
-
Return the side stand to its original position.
-
Check if there is sufficient fuel and engine oil
1.
Turn the main switch to OPEN position
2.
Check to see that the engine kill switch is turned OFF
3.
Completely release the throttle grip, apply rear brake lever.
4.
Push the starter switch to engage the electric start. Do not touch the starter switch again once the
engine has started.
NOTE:
-
If the engine fails to start, release the start switch, wait a few seconds and try again. Each
attempt should not be over 4 seconds to preserve the battery. If the engine has not started after 4
attempts, turn the throttle grip 1/8 to 1/4 turns and push the starter switch again.
-
For an engine which cannot be cranked by electric start, or a vehicle which has not been used for
a long time, turn on the main switch and twist throttle grip and apply kick starter to crank the
engine.
5.
For a cold vehicle, warm the engine for 1 to 3 minutes before riding.
