- 2 -
PAIRING THE TRANSMITTER AND DRONE
HOW TO CONTROL THE AIRCRAFT
• Be sure Transmitter has
fresh batteries and the
drone is fully charged.
• Turn on the Transmitter.
• Power on the Drone by
plugging the battery cable
into the power outlet.
• Place the drone on flat ground,
push both throttle levers all the way
up then push both throttle levers all
the way down and outward.
• You will hear a beep when the
Transmitter and Drone are
paired successfully.
TRIM CONTROLS
RESETTING THE GYROSCOPE
• If the vehicle is flying erratically,
you may need to reset the
gyroscope.
• Hold both control levers down
and pointed
to the inside for 3 seconds.
• The vehicle lights will turn solid
when the operation is complete.
PROPER FLYING CONDITIONS
• This vehicle can fly indoors
or outdoors
• Make sure ate there no obstacles
nearby (furniture, trees, power
lines, etc.)
• When flying outdoors, fly in
warm, sunny, calm conditions.
• Do not fly in rain, snow, hail
or heavy wind.
