Module Not Found
Symptoms: The module does not show up with its ID in the graphical user interface.
Possible issues and suggested solutions:
• The dongle is not connected – unplug the dongle from the USB port and plug it back in.
• The joint module is not turned on. Even if the LED has a color, the module might be turned off while it’s charging.
Press the module’s button to see if the color changes; if it does, it means it is turned on; if not, then check the on/off
switch.
• The joint module has crashed – try restarting the module by toggling the on/off switch.
• The joint module is broken – contact Pitsco Education.
Module Overloaded
Symptoms: The joint module blinks red and stops moving for a period of time.
Possible issues and suggested solutions:
• A servo on the module has been overloaded (for example, it was commanded to perform a movement that it does
not have the strength to perform) – modify the program and/or robot configuration to avoid damaging the servo.
• A servo has overheated – let the servo cool down.
17
CHAPTER 4: TROUBLESHOOTING
Summary of Contents for Fable
Page 1: ...v User Guide 45286...