M1S1 ShareVgo Smart Home Rowing Machine
8
Attach the Rear Base Tube (3) onto the
Sliding Track (4) using 4 Screws (55), 4
Spring Washers (54), and 4 Washers (6).
Tighten with the Alley Key (70).
Be sure
the spring washers are closer to
the head of the screw. So that the Rear
Base Tube is installed outwardly.
70
Step 3
–
Seat and Sliding Track Assembly
4
53
4
35
35
37
44
53
X
Slide the Seat (53) onto the Sliding Track (4).
Be sure
to slide from the end that
does not
have the Rubber Stopper.
Insert the Pin (44) with the Stopper (35)
through the hole near the end of the Sliding
Track (4). Then attach the Rubber Stopper
(35) to the other side and secure it with
Screw (37). Tighten using both the Allen Key
(69) and the Screwdriver (71).
71
69
3
4
Step 4
–
Rear Base Tube Assembly
