M1B1 ShareVgo Smart Folding Exercise Bike
11
Monitor Operation & Function
MODE
button:
1. Press to select functions.
2. Press and hold 3-5 seconds to reset time, distance, calorie values to zero.
Operations:
1. SCAN: Press MODE until ‘SCAN’ appears. The monitor will rotate through all 6 functions: Time,
Speed, Distance, Calorie, Odometer, and Pulse. Each function will be displayed for 5 seconds.
2. TIME: Displays the total amount of time exercised.
3. SPEED: Displays the current speed.
4. DIST: Displays the total distance traveled.
5. PULSE: Displays your current pulse. Your hands must be placed on the metal contact pads for
6-7 seconds or the machine will not be able to accurately read your pulse. The monitor will
display pulse in beats per minute (BPM).
NOTE: In the first 2-3 seconds, the monitor may display a higher pulse than your actual pulse.
Once your hands are settled, the machine will display your actual pulse. The measurement should
not be treated as the basis for medical purposes.
Note:
1. If the display is faint or will not display properly, replace the batteries.
2. The monitor will automatically shut off if it does not receive signal after 4 minutes.
3. The monitor will turn on when you begin using the exercise bike or by press the MODE button.
4. The monitor will begin calculating when you begin exercising and will stop calculating when you
stop exercising for four seconds.
Specifications:
FUNCTION
SCAN
5 seconds per display
TIME
00:00’~99:59’
SPEED
The maximum signal it can pick up is 999.9 Mile/H
DISTANCE
0.0~9999 Mile
PULSE
40~240 BPM
BATTERY TYPE
2pcs of SIZE – AAA
OPERATING TEMPERATURE
0°C ~ +40°C
STORAGE TEMPERATURE
-10°C ~ +60°C
