M1B1 ShareVgo Smart Folding Exercise Bike
7
Step 2 – Handlebar and Saddle Assembly
Facing
Up
10
4
11
12
14
2-1
5
44
41
40
42
2-2
43
37
47
2-3
44
41
40
42
2-5
47
2-1
: Attach the Front Handlebar (4) with the
Handle Pulse Sensors (5) facing
up,
and
at the
same time, attach the Monitor/Tablet Plate (12) to
the Main Frame (14) using 2 Bolts (10) and 2 Arc
Washers (11).
2-2
: Detach the Saddle Base Tube (44) from the
Saddle Trench (42) by unscrewing and releasing
the Knob (40).
NOTE
: DO NOT lose Washer (41).
2-3:
Remove the pre-installed 3 Nuts (43) and 3
Washers (37) from the Saddle (47).
2-4
: Attach the Saddle (47) to the Saddle Base
Tube (44) with 3 Nuts (43) and 3 Washers (37).
2-5
: Re-attach the Saddle (47) and the Saddle
Base Tube (44) to the Saddle Trench (42) by
tightening the Knob (40) with the Washer (41).
TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT
THIS TIME.
#10 M8x40x20xS6 2PCS
#11 d8x 20x2xR16 2PCS
#43 M8xH7.5xS13 3PCS
#37 d8x 16x1.5 3PCS
43
37
47
2-4
44
