M1B1 ShareVgo Smart Folding Exercise Bike
8
Step 3 – Backrest and Rear Handlebar Assembly
50
43
37
46
44
45
3-1
#35 1PC
#46 8x52x59 1PC
#34 M8x45x20xH5 2PCS
#45 M8x55x20xS6 1PC
#43 M8xH7.5xS13 1PC
#37 d8x 16x1.5 3PCS
#32 M8xH16xS13 2PCS
44
38
37
32
37
32
35
34
3-2
34
42
40
3-3
27
25
3-4
3-1
: Attach the Backrest Post (50) to the Saddle
Base Tube (44) and secure it at the
lower hole
using Bolt (45), Washer (37), and Nut (43). Insert
Pin (46) into the
upper hole
.
3-2
: Attach the Rear Handlebar (38) and the
Handlebar Support Plate (35) to the Saddle Base
Tube (44) using 2 Square Bolts (34), 2 Washers
(37), and 2 Nuts (32).
3-3
: To adjust the saddle
horizontally
, unscrew
the Knob (40) and move the saddle
forwards
and backwards
. Once at desired position,
be
sure
the
Knob (40) is fully tightened.
3-4
: To adjust the saddle
vertically
, unscrew
and pull the Knob (27) and move the Saddle
up
and down
.
Be sure
Knob (27) locks securely
into a hole before use.
TIGHTEN ALL NUTS, BOLTS, AND SCREWS
AT THIS TIME.
