Shark Ninja Master Prep Professional, Owner'S Manual

8

1-877-646-5288

Using the Ninja

®

 Master Prep

®

 Professional Pitchers

  WARNING: DO NOT try to place the Blade 

Assembly onto the Power Head and then into the 
Master Prep Professional pitcher.

1 

 Place the Master Prep Professional pitcher on a clean, 
dry, level surface. 

2

  Holding the blade assembly by the shaft, place it onto 

the spindle pin inside the Master Prep Professional 
Pitcher. 

 •  Use the Ninja 6-Blade Assembly in the 48 oz. Pitcher. 

(fig. 1)

 •  Use the Ninja 4-Blade Assembly in the 40 oz. Pitcher. 

(fig. 2)

IMPORTANT: Place blade assembly inside the 
container carefully as blades are sharp.

3

  Add the ingredients to be processed into the Ninja 

Master Prep Professional pitcher. 

4

  Place the pitcher splash guard onto the top of the Ninja 

Master Prep Professional pitcher. 

(fig. 3)

IMPORTANT: Never add ingredients into the Ninja 
Master Prep Professional pitcher before placing 
the blade assembly in first. 

  WARNING: Never leave the appliance unattended while in use. 

  WARNING: Remove utensils prior to processing. 

  CAUTION: Handle the Blade Assemblies with care, as the blades are very sharp.

  CAUTION: Do not blend hot liquids. 

IMPORTANT: Make sure that the Power Head is plugged in for use.

IMPORTANT: Never run the appliance empty.

Fig. 1

Fig. 2

Fig. 3

Shaft

Shaft