www.ninjakitchen.com
9
5
Place the power head on top of the pitcher splash
guard making sure that it is securely in place.
(fig. 3)
DO NOT
attempt to operate the appliance without the
safety splash guard in place.
6
To start the appliance, plug the power cord into the
electrical outlet, securely hold power head while
operating and press on the on/off pulse button located
on the top of the power head.
(fig. 4)
7
Hold the Ninja
®
Master Prep
®
Professional pitcher
firmly while depressing the on/off pulse button to
ensure the unit stays in place.
NOTE: DO NOT
operate the appliance continuously for
more than 15 seconds at a time.
8
To stop the appliance, remove your fingers from the on/
off pulse button.
9
In order to obtain a better quality of chopping, operate
the appliance by using the “pulse” method.
10
Make sure that the Blade Assembly has stopped
completely before removing the power head.
11
If the ingredients stick to the side of the Master Prep
Professional pitcher, stop the appliance, remove the
power head and the splash guard. Use a spatula to
dislodge the pieces and then replace the splash guard
and the power head. Continue processing.
12
Depending on the consistency of the contents, use the
pouring spout to empty liquid contents.
13
For thicker consistencies, first remove splash guard and
Blade Assembly (by its shaft), then empty contents of
the Ninja Master Prep Professional pitcher.
HINTS & TIPS FOR USING YOUR NINJA
MASTER PREP PROFESSIONAL
• To crush ice into snow, start by using short pulses to
break up large chunks. Continue until snow is achieved.
Fig. 4
Fig. 5
CAUTION: Blade Assemblies are removable and not locked
in place. If using pour spout, make sure the splash guard is
secure on the jar by firmly pressing on the splash guard.
CAUTION: Blade Assemblies are removable and not locked
in place. If pouring with the splash guard removed, always
remove the Blade Assembly first.
