background image

2

FREEPHONE:

 0

800 862 0453

1.  

USE THE SYSTEM ONLY FOR ITS INTENDED 
USE AS DESCRIBED IN THIS MANUAL.

2.  

ONLY USE WATER.

 To extend the life of your 

Press & Refresh

 Garment Care System

, we 

recommend using distilled water especially if you 
live in an area with hard tap water. 

3.  

DO NOT

 add cleaning solutions, scented 

perfumes, oils, or any other chemicals to the 
water used in this appliance as this may damage 
the unit or make it unsafe for use.

4.   Use of any substances other than 

manufacturer’s recommended accessories will 
automatically void your warranty.

5. 

DO NOT

 use outdoors.

6.  

DO NOT

 leave the appliance unattended when 

plugged in.  

7.   Always unplug the power cord from the 

electrical outlet when not in use, when filling 
the water tank and before cleaning.  

8. 

DO NOT

 allow to be used as a toy.

9.  

DO NOT

 put any objects into openings or 

operate with any opening blocked.

10.  

DO NOT

 use on leather, suede, vinyl, plastic or 

other delicate steam sensitive materials. Always 
determine the colorfastness of any fabric before 
using the fabric steamer by testing it on a small 
portion of the garment’s underside. 

11.   This appliance and the accessories become 

hot during use. Exercise care when changing 
accessories and follow removal and changing 
instructions as outlined in the manual. Do not 
change frames while the unit is turned on. Turn 
the unit off, wait for the Wrinkle Eraser

 to 

cool, and then change frames.

12.   The garment steamer can be used in a vertical 

or horizontal motion. 

NEVER

 hold the steam 

head down while at rest or tilt it in a backward 
position as this may result in discharge.

WHEN USING YOUR SHARK

®

  

PRESS & REFRESH

 GARMENT CARE 

SYSTEM, BASIC SAFETY PRECAUTIONS 
SHOULD ALWAYS BE FOLLOWED, 
INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING 
YOUR PRESS & REFRESH

 GARMENT 

CARE SYSTEM.

 

DANGER OF SCALDING 

 

Please use caution when using the garment 

steamer. The Wrinkle Eraser

 pressing bar and 

the steam emitted are very hot. The Wrinkle 
Eraser

 is not controlled by the steam trigger and 

is hot as long as the unit is turned on and for 30 
minutes after the unit has been turned off.

IMPORTANT: 

This appliance is not intended for 

use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack 
of experience and knowledge, unless they have 
been given supervision or instruction concerning 
the use of the appliance by a person responsible 
for their safety.

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only 

Summary of Contents for Press & Refresh GS500UKL

















Reviews: