Shark Press & Refresh GS500UKL, User Manual

9

Fig. 3

Assembling the vertical  
press pad:

3

 Insert the garment hook into 
the opening at the top of the 
vertical press pad (

Fig. 1

). 

Secure the rod into the garment 
hook on either side of the pad 
making sure they are inserted 
firmly (

Fig. 2

). The support 

rods come assembled in the 
pad. 

4

 The Vertical Press Pad comes 
asembled with heat protection 
panels in the pockets on the 
back. These panels protect your 
door from heat damage and 
should be in place at all times 
during use. 

Assembly & use instructions:

1

   Remove contents of the Press & 

Refresh

™

 Garment Care System 

and lay them out on a flat 
surface to see that you have all 
the components to complete 
the assembly.

2

   READ ALL INSTRUCTIONS 

BEFORE USING YOUR PRESS 
& REFRESH

™

 GARMENT CARE 

SYSTEM.

 IMPORTANT:

 Always make 

sure the garment steamer is 
UNPLUGGED from the electrical 
outlet when not in use. Never 
fill the water reservoir when the 
unit is plugged in.

Assembly of the Vertical Press Pad

5

 Attach the vertical press pad to 
any door. With the door open, 
loop the straps at the top of the 
vertical press pad around the 
corner of the door and repeat 
on the opposite side. Gently 
tug on the pad to make sure 
it is secure and shut the door 
completely to ensure the pad is 
stable for pressing. Be careful 
not to close the door on your 
fingers. Adjust the straps to the 
appropriate height for comfort 
(

Fig. 3

).

Care instructions:

6

   Remove the 8 heat protection 

panels from the back of the 
pad and remove the garment 
hook and rods. Machine wash 
in warm water with liquid 
detergent and lay flat to dry. 
Do not use bleach or fabric 
softener. 

Fig. 2

Fig. 1

The straps can be adjusted 
to fit any door using the 
buckle to adjust the strap 
lengths.