USB LANPORT 100/400
The current user decides whether he unlocks the device
“OK” or not “Cancel”:
As soon as the device is unlocked the requester will receive the
following info
and now can mount the device by clicking the
“Connect device” button.
8. Important notes
1. You need to install the server software on every PC, from which you want to access the USB LANPort.
2. Your operating system will treat the connected USB device as if it is directly connected to the PC. This means that
potential drivers (e.g. printer drivers) need to be installed on the system (for further details refer to the manuals of the
according devices).
3. As the devices will be handled like directly attached hardware, we suggest to remove memory devices (HDDs, USB sticks
etc.) using the “Safely remove hardware” function before terminating the connection via “Disconnect”.
The server software will also prompt you with the following note:
Other USB devices such as printers, scanners etc. do not require this step and can directly be disconnected.
4. The USB to IP translation may cause a decrease in transfer speed compared to the native operation of the USB devices and
is caused by technical means.
9
Summary of Contents for USB LANPORT 100
Page 1: ...USB LANPORT 100 400 Manual...
