SHARKS Li-Ion SH 5502 Instruction For Operation And Maintenance Download

Page: 37 / 97

420 774 335 397 www.sharks-shop.cz Stránka 37

IMPORTANT WARNINGS

Danger! Never short the battery or expose it to moisture. Do not store it together with metal
parts that could cause short circuits. There is a risk of battery overheating, eventually burning
or exploding.

If you come into contact with acid or similar internal fluid or substance contained in the
battery, immediately wash the affected area thoroughly with plenty of water. If these
substances come into contact with your eyes, rinse thoroughly with water and seek medical

attention immediately.

Do not place the rechargeable battery in fire or water! There is an explosion! Rechargeable
batteries should not be disposed of in conventional household waste but in a local collection
yard in accordance with regulations or handed over to retailers of "Appliance batteries".

6) Service

●

Have your power tool serviced only by an authorized service center. This will ensure safe

maintenance of repaired power tools. Faulty parts will be replaced by an authorized Sharks service.

●

Do not attempt to open and disassemble the tool, battery, or charger.

●

Clean the tool only after disconnecting it from the charger. Use only a damp cloth in a mild detergent

solution. In any case, do not use solvents, alcohol, gasoline or other strong chemicals to clean the
product.

SPECIFIC SAFETY INSTRUCTIONS

●

The product is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack experience and knowledge, unless they have been given supervision or
instruction concerning use of the product by a person responsible for their safety.

●

Warning! Read and understand all instructions. Be familiar with all controls and proper use of the

machine. Follow all safety instructions. Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious personal injury.

●

Usage of hedge trimmer (the tool) always involves the risk of accidents, therefore please observe

the relevant accident prevention instructions.

●

The tool has been constructed according to the latest technology and in accordance ith the

recognized technical safety regulations. Nevertheless, use of the tool can involve risks to the user or
the third persons, and can cause damage to the tool or other objects.
WARNING! This tool is not intended for use by young children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the tool safely. Young
children should be supervised to ensure that they do not play with the tool.
WARNING! Using battery powered power tools, you must observe following safety instruction to
protect yourself against electric shock, danger of injuries and danger of fire.

●

Read all these instructions before using the hedge trimmer and observe strictly. Keep these safety

instructions at a safe place.

●

Use the tool in a safety conscious manner and for suitable applications. Immediately rectify or have

rectified any faults which could adversely affect safety!

●

This tool may cause serious injuries. Please read the instructions manual carefully as to the correct

handling, the preparations, the maintenance and the proper use of the hedge trimmer. Familiarise
yourself with the tool before the first use and also have you introduced to practical use of the tool.

●

Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to

be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment
of inattention while operating the hedge trimmer may result in serious personal injury.

●

Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing

the hedge trimmer always fit the cutting device guard. Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.

●

Hold the power tool by its insulated gripping surfaces only, as the blade may come in contact with

hidden wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.

●

Maintain Product with care. Keep cutting edge sharp and clean for best performance and to reduce

the risk of injury. Follow instructions for lubricatingand changing accessories. Inspect the battery
charger cord periodically, and if damaged, have it replaced or repaired by an authorized service
dealer.