SHARKS SH 250 W Instruction For Operation And Maintenance Download

Page: 26 / 68

420 774 335 397 www.sharks-shop.cz Stránka 26

Dear customer,

Thank you for purchasing the Sharks electric shaver mower model SH 250 W. Your new string mower
was developed and manufactured by Steen QOS, s.r.o., to meet the demands of high standards,
operational reliability, ease of use and user safety.
With proper care, it will provide you with stable and reliable performance. If you use it correctly and
only for the purpose of hobby use, you will enjoy years of safe operation.

NOTICE
Before using your new SHARKS product, read this Owner's Manual carefully.
Pay special attention to all WARNINGS and WARNINGS.
Your SHARKS product has many features to make your work easier and
faster. When developing this product, great attention has been paid to safety,
operation and reliability, with a view to simple maintenance and operation.

GENERAL SAFETY RULES

NOTICE!
Read and familiarize yourself with all the instructions. Failure to follow the instructions below may
result in electric shock, fire and / or serious injury to persons.

SAVE THESE INSTRUCTIONS FOR FURTHER USE!

Workspace

1. Keep your workplace clean and well-organized. Disorder and unlit spaces are a common cause of
injuries.
2. Do not use electrical tools in areas containing explosive substances such as flammable liquids,
gases or dust. Electric tools spark and can cause dust or gases to ignite.
3. When using the power tool, keep strangers, children and visitors out of the work area. Anyone
entering the work area must use protective equipment. Workpiece fragments or broken fitting tools
may flee and cause injury in the immediate vicinity of the work area.

Electrical safety

1. The double-insulated tool is equipped with a side-facing plug that can only be inserted into the
socket in one position. If the plug does not fit into the socket, rotate it. If it still does not, contact a
qualified electrician to install the correct type of plug. Do not make any changes to the plug. Double
insulation eliminates the need for three-wire grounded power leads and a grounded power system.
2. Avoid touching the body with grounded surfaces such as pipes, radiators, cookers and refrigerators.
There is an increased risk of electric shock if your body is grounded.
3. Do not expose power tools to damp or rain. Water that penetrates the power tool increases the risk
of electric shock. If it is inevitable to operate in humid environments, it is necessary to use a power
protected by a current protector (RCD).
4. Do not overload the power cord. Never use it to carry the tool or pull the plug out of the socket. Do
not expose the power cord to heat, oil, sharp edges, or moving parts. Replace the damaged power
cord immediately. Damaged power leads increase the risk of electric shock.
5. When using outdoor tools, use extension cords for outdoor environments, marked "W-A" or "W".
These cables are designed for outdoor operation and reduce the risk of electric shock.

Safety of persons

1. Be careful, observe carefully what you are doing and use common sense when using electrical
tools. Do not work with tools if you are tired or under the influence of drugs, alcohol or drugs. A
moment of inattention when operating an electric tool can result in serious injury to the person.
2. Dress appropriately. Do not wear loose clothing and ornaments. Consider long hair. Keep long hair,
clothes and gloves out of moving parts. Free clothing, ornaments or long hair can be captured by
moving parts.