1. Grasp the handle with both hands, use the whole hand.
Put feet apart (you sit astride stance slightly wider than
shoulder width) so that your weight is distributed evenly on
both feet. Always make sure that when you work hard you
maintain a balanced stance.
2. Keep cutting head below waist level.
3. Speed Engine Keep at a level necessary to perform
cutting. Never raise engine speed above that necessary.
4. If the machine starts to knock or vibrate, turn off the
engine and check the whole apparatus. Do not use the
equipment until the problem has not been properly
removed.
5. Keep all parts of your body away from the rotating cutting
links and hot surfaces.
6. Never touch the muffler, spark plug, or other metallic
parts of the engine when the engine is running or
immediately after it is turned off. Such activity could result in
severe burns or electric shock.
IF SOMEONE COMES
1. constantly protected from dangerous situations. Warn
adults to keep pets and children away from the work area.
Be careful when someone accesses to you. Injury may
occur stone chips.
2. When someone calls you or any other way distracted at
work, always before turning, make sure you shut off the
engine.
MAINTENANCE
1. In order to maintain your equipment in proper working
order, perform the maintenance and inspections at regular
intervals, described in this manual.
2. Before performing any maintenance or inspection, make
sure the engine is off
WARNING
Metallic parts reach immediately after
stopping the engine high temperature!
420 774 335 397 www.sharks-shop.cz Stránka 50
