3. Pour the entire amount of oil and stir properly.
4. Pour the remainder of gasoline and stir the mixture again - for at least one minute. Some oils can be
difficult depending on the ingredients of oil stir. Adequate mixing is necessary for the life of the engine.
Be warned. If the mixing is insufficient, there is an increased risk of seizing of the piston due to
abnormally poor mixture.
5. A container for stirring, mark to prevent mixing in other containers.
FILLING THE FUEL MIXTURE TO DEVICE
1. Unscrew and remove the cap from the fuel tank. Keep the cap and the entrance to the tank clean.
2. Pour fuel into the tank, about 80% of the tank.
3. Safely tighten the lid and dry spills caused when fulfilling.
WARNING
1. To select refueling open space.
2. Before starting the engine, move to a distance of at least 3 meters from the place of
performance.
3. Before filling the tank shut off the engine. At the same time, make sure that you have enough
in the tank shuffled fuel mixture.
TO ENSURE LONG ENGINE LIFE DO NOT:
1. FUEL WITH NO OIL (RAW GASOLINE) - causes rapidly severe damage to internal engine parts.
2. The ethyl alcohol - it can damage the rubber and / or plastic parts and disruption of engine
lubrication.
3. OIL FOR 4-stroke engines - can cause spark plug fouling, exhaust port blocking, or piston ring
sticking.
4.
Mixed fuel, unused for longer than one month
, it may clog the carburetor and cause poor engine
operation.
5. In the case of long term storage facility empty and clean the fuel tank. Further activate the engine
and empty the carburetor from the fuel mixture.
6. In the event of liquidation of packaging used for mixing the fuel mixture, use an authorized collection
site.
420 774 335 397 www.sharks-shop.cz Stránka 53
