Safety instructions
WWW.SHARKS-SHOP.CZ
25
WARNING!
Please read these instructions carefully. In the case of
non-compliance with the instructions below there is a risk of electric shock, fire
and serious injury. The term "electric power" given all the warning applies to
tools running on mains.
RECOMMENDATION: KEEP THESE INSTRUCTIONS FOR FUTURE USE!
Work Area
a) Keep work area clean and well lighted.
In the squalid and dark areas in danger of accidents.
b) Do not operate electrically powered devices in hazardous environments, eg. in the presence
of flammable liquids, gases or dust. Power tools generate sparks that can ignite the dust or
fumes.
c) Keep children and bystanders keep using the machine away from the working area.
Distractions can cause you to lose control of the device.
Electrical safety
a) Connection plug the device must match the outlet. Never modify the plug yourself! With
machines with the protective earthing do not use any adapter plugs. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with grounded surfaces, for exsample pipes, radiators, ranges and
refrigerators. If your body is grounded, there is an increased risk of electric shock.
c) Protect the machine from rain and moisture. Water entering an electrical device increases
the risk of electric shock.
d) Do not use the cable in the wrong way. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts of the
device. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use only such as extension cords, which are suitable
for outdoor use. Using a cord suitable for outdoor use reduces the risk of electric shock.
Safety of persons
a) Stay alert, watch what you are doing and when operating a power wisely. Do not use if you
are tired or under the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious injury.
b) Use safety equipment. Always wear proper eye protection. Wearing personal protective
equipment such as dust mask, safety boots with non-slip soles, protective helmet or headset,
used for appropriate conditions will reduce the risk of injury.
c) Avoid accidental start-up. Before plugging into a power outlet, so make sure the switch is in
the "off" position. If you have to wear the device finger on the switch or plugging in power
turned on, then it can lead to accidents.
d) Before switching Remove any adjusting key or screwdriver. A tool or wrench that is in a
rotating tool part can lead to injuries.
e) Do not overreach. Make sure your footing and keep your balance. So you can tool in