background image

3

TV

Location

• For normal operation, your TV should be located in an area of the room where cool adequate ventilation

is provided. Do not place the back of the television set in a place where free airflow will be restricted.

• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from this TV set.

Power

Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.

Note:

• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall

outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)

• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near

the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received

due to the interference of the TV.

L

Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.

Insert the batteries

• With your thumb nail, pull up the slit as indicated by the arrow to remove the back cover. Insert two

batteries (size “AA”). Be sure to match the battery 

e

/

d

 terminals with the 

e

/

d

 marks inside the

compartment.

Before Operating Your Television

B a t t e r y
Cover

Pull up

Supplied Accessories

Size AA

Dry Batteries

Infrared Remote Control/Part Number

RRMCG1324CESA (13L-M100B)
RRMCG1324CESB (13L-M150B)

Important Information (Continued)

WARNING  - FCC Regulations state that any unauthorized changes or modifications to this

equipment not expressly approved by the manufacturer could void the user’s authority
to operate this equipment.

01-05 13L-M100B/150B.p65e

4/23/99, 6:19 PM

3

Summary of Contents for 13L-M100B





























Reviews: