E2
ANTENNA CONNECTION
Standard DIN45325
plug (IEC169-2)
75-ohm
coaxial cable
(round cable)
(not supplied)
300-ohm
twin-lead
flat feeder
(not supplied)
75-ohm
impedance
converter
(not supplied)
Antenna in
TV
Antenna in
TV
VCR
To antenna
in terminal
To RF out
terminal
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.
Connecting to an antenna
Connecting to an antenna via a VCR
If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
Connecting to video equipment
Enjoy playback from a video disc player, VCR or other video equipment by connecting them to
this TV set using the Audio/Video in terminals.
• For playback of monaural audio, connect the external source to the audio input left terminal on the front or rear of the
TV set (MONO) to hear the same sound from both speakers.
• The audiovisual cords required to connect the TV set with video equipment may differ from those shown in the above
diagram. See the operation manual of your video equipment for connection details.
• The above recording and editing connections are for intended solely for personal use and not for the illegal copying of
audiovisual material protected by copyright laws.
Example of rear terminals usage
E3
CONNECTING TO OTHER EQUIPMENTS
TV
VCR
Video Game
Camcorder
Yellow : To VIDEO
White : To AUDIO (L)
Red
: To AUDIO (R)
To Audio/Video
out terminals
For Playback
DVD Player
For Recording and Editing
VCR
TV
VCR
To Audio/
Video out
terminals
To Audio/
Video out
terminals
To Audio/
Video in
terminals
Yellow : To VIDEO
White : To AUDIO (L)
Red
: To AUDIO (R)
E4
ACCESSORIES
The following accessories are included with this television.
Remote Control
Size-AA batteries
Operation manual
E5
PART NAMES
Door
Bottom
!
$
%
^
@ #
&
*
POWER
!
POWER switch
Turns on and off the main power.
/
%
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
CH
CH
/
^
Channel up/down buttons
Selects the channels.
Tunes or sets the channels.
@
Power indicator
Power can be turned on by the remote control when
the indicator is dimly lit.
#
Infrared sensor window
Receives the infrared wave from the remote control.
&
Video input terminal (AV-2 IN)
Connects to a camcorder, video game, etc.
*
Audio input terminals (AV-2 IN)
Connects to a camcorder, video game, etc.
MENU/PRESET
$
MENU/PRESET button
Tunes the channels.
Used for MENU setup.
TV set
To open the door
Using the projection located under the
“
√
PULL-OPEN” indication, pull and lift the
door open.
To close the door
Using the projection, lower the door until
closed.
Caution:
• When opening or closing the door, do not insert
your fingers into the gap between the door and
front panel. This may result in an injury.
Example of front terminals usage
21J-FH1RU_EN
7/12/06, 5:09 PM
2
