ADVANCED menu
1.
Press the Cursor UP/DOWN buttons
/
to select a
parameter from the list: OSD contrast, Tint control, Zoom or ECO
mode. The red point mark indicates the selected parameter.
2.
Press the Cursor LEFT/RIGHT buttons
/
to adjust picture
quality to your liking.
Select OSD contrast
to adjust the contrast level of the On Screen
Display menus.
Select Tint control
to adjust your desired skin colour (Cool or Warm).
Select NTSC Hue control
to adjust the skin colour (Green or Red)
during NTSc signal reception.
Select ECO mode
“On” to attenuate the contrast in the excessively white areas of the picture.
In this menu you can switch to the following menus:
Press the RED button
to return to the
LEVELS menu
.
Press the BLUE button
to see the
100 Hz menu
.
3.
Press the MENU button
M
to close the
ADVANCED Menu
.
100 Hz menu
1.
Press the Cursor UP/DOWN buttons
/
to select:
Comb filter, Noise reduction, Digital scan, D.Gamma or SVM. The red
point mark indicate the selected item.
2.
Press the Cursor LEFT/RIGHT buttons
/
to select ON /
OFF / AUTO / etc.
Select Comb filter
(ON) to reduce the colour interference in picture
with fine details and the picture gets sharper.
Select Noise reductor
(Auto, High or Medium) to reduce the noise
when receiving a weak signal and improve the picture quality.
Select Digital scan
(ON) to reduce the line flicker and improve the
picture quality.
Select D. gamma
(High or Medium) to increase the brightness of dark part of picture.
Select SVM
(Scan Velocity Modulator) to change the resolution of the picture (Off, Medium or High). The TV is factory
pre-set to “Medium”.
In this menu you can switch to the following menus:
Press the RED button
to return to the
LEVELS menu
.
Press the YELLOW button
to return to the
ADVANCED menu
.
3.
Press the MENU button
M
to close the
100 Hz menu
.
a
a
CH
CH
a
a
CH
CH
13
ENGLISH
ADVANCED menu
100 Hz menu
RED
BLUE
RED
YELLOW
