LOCK PROGRAMME Menu
Select this option to protect the access to separate programmes.
If necessary, repeat steps (1. ~ 5.) .
6. Press the Cursor UP/DOWN buttons
/
to select
“Programme”. The red point mark indicate the selected item.
7. Select the programme channel number you want to set with the
Cursor LEFT/RIGHT buttons
/
8. Press the Cursor UP/DOWN buttons
/
to select
“Type of protection”. The red point mark indicate the selected item.
9. Press the Cursor LEFT/RIGHT buttons
/
to select an
option:
NONE: To cancel the protection from the selected programme.
ALWAYS: To protect the access from the selected programme
throughout the day
AUTO (VPS CODE): To activate the AUTOMATIC PROTECTION and the selected programme will only be blocked
when it receives the VPS signal. This VPS signal is sent by some broadcasting stations, when the programme that is
being shown is not suitable for children.
TIMER: The access to the selected programme will be protected during the programmed period.
10.If you have selected TIMER, press the Cursor UP/DOWN buttons
/
to select:
Start : To enter the hour and minutes, from the beginning of protection, with the Cursor LEFT/RIGHT buttons
/
.
End: To enter the hour and minutes, to the end of protection, with the Cursor LEFT/RIGHT buttons
/
.
11.Press the MENU button
M
to close the LOCK ALL Menu
CLEAR LOCK Menu
This option enables you to erase all the adjustments made to the
CHILD-LOCK function.
If necessary, repeat steps (1.~ 5.) .
6. Press the BLUE button
to confirm that you want to initialize
the CHILD LOCK system
Notes:
In order for the timed protection to function correctly, the internal TV clock must be set at the right time. To check the time
setting see section -Automatic or Manual time adjustment- (page 21).
When you protect one programme, all the external entries (Euro-SCART and AV-1) are protected automatically.
Access to protected modes
LOCK ALL:
When the TV is protected in this way, it will be blocked when switched on and a red box will appear on the screen
(against a blue background), along with the instruction «Input your PIN» and the letters « X X X X ».
In order to view your TV you must press the number buttons of your Secret Number (PIN).
If the Secret Number is not entered, only the main power button (
I
) on the TV and the Stand-by button (
B
l
TV)
on the remote control will operate.
If the protection is timed, the blocking of the TV will only occur during the time period programmed.
LOCK PROGRAMME:
When one or several programmes are protected, the TV will block any attempt to gain access to them and the
instruction «Input your PIN» will appear on the screen.
In order to view these programmes you must press the number buttons of your Secret Number.
If the Secret Number is not entered, only the buttons for changing programmes (
/
), the Stand-by
button (
B
l
TV) on the remote control and the main power button (
I
) on the
TV will operate.
If the protection of the programme you want to gain access to is timed or automatic, the blocking of the programme
will only take place during the time period programmed or on receiving the special VPS signal for automatic
blocking.
IF YOU LOSE OR FORGET YOUR PIN, CONTACT YOUR TECHNICAL SERVICE OR DEALER
CH
CH
a
a
a
a
CH
CH
a
a
CH
CH
a
a
CH
CH
24
RED
GREEN
BLUE
SECRET NUM
LOCK ALL
CLEAR LOCK
Programme
Type of protection:
Start:
End:
LOCK PROGRAMME Menu
GREEN
YELLOW
BLUE
SECRET NUM
LOCK ALL
LOCK PROG
Press the BLUE button ...
CLEAR LOCK Menu
NONE
