C ON T R A S T
5 0
E9
PICTURE OR SOUND ADJUSTMENT
• TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV input)
• Picture Noise Reduction
Noise might be generated on images when playing deteriorated video tapes or
when receiving broadcasts with relatively weak signals. In these cases, set
PICTURE NR to “ON” to reduce the noise. However, when receiving good images
without noise, you can get better image quality by turning OFF this feature.
• WHITE TEMP can only be adjusted on PICTURE menu.
• If any items is adjusted, VIDEO MODE will automatically change to CUSTOM.
SOUND menu table
POWER
SAVE
TV/VIDEO
SOUND MODE
SURROUND
NORMAL
1
2
3
4
5
6
7
8
0
9
MENU
B
A
C
D
LANGUAGE
CH
CH
CH
CH
MENU
NORMAL
!
Press
MENU
to call MENU screen.
@
Press
CH
/
CH
to select “PICTURE” or “SOUND”.
#
Press
/
to display PICTURE or SOUND menu.
$
Press
CH
/
CH
to select adjustment items.
%
Adjust using
/
.
• Wait for approximately five seconds to return to PICTURE/SOUND menu.
^
Repeat steps 4 and 5 above to adjust other items.
&
Press
MENU
until normal screen appears.
The following table lists the adjustment items shown in the PICTURE/SOUND
menu and how they change as you press
/
.
PICTURE menu table
[ PICTURE menu screen ]
[ SOUND menu screen ]
ME NU
S OUND
P I C T UR E
F E A T UR E
T I ME R
C H - S E T T I NG
P I C T UR E
5 0
– 1 0
C U S T OM
+ 2 5
2 0
– 2 0
ON
C ON T R A S T
C O L OUR
V I D E O MOD E
B R I GH T N E S S
T I N T
S H A R P N E S S
P I C T UR E NR
WH I T E T EMP
S E L E C T : C H
A D J U S T :
R E T U RN : ME NU
ME NU
S OUND
P I C T UR E
F E A T UR E
T I ME R
C H - S E T T I NG
B A L A N C E
1 5
–
+
–
+
–
+
Selected item
Press
Press
VIDEO MODE
CONTRAST
To decrease contrast
To increase contrast
COLOUR
For less colour intensity
For more colour intensity
BRIGHTNESS
For less brightness
For more brightness
TINT
To move tint toward red
To move tint toward green
WHITE TEMP
To more reddish background
To more bluish background
SHARPNESS
For less sharpness
For more sharpness
PICTURE NR
(see note below)
ON OFF
DYNAMIC
STANDARD
SOFT
CUSTOM
Selected item
Press
Press
AVL*
2
The AVL is ON
The AVL is OFF
BASS+
The BASS+ is ON
The BASS+ is OFF
ON OFF
ON OFF
EQUALIZER
(Refer to for details on Equalizer)
E12
SURROUND*
1
(Please see note below)
BALANCE
To shift balance
toward left
To shift balance
toward right
Enables individual channel setting.
!
Press
MENU
to call MENU screen.
@
Press
CH
/
CH
to select “CH-SETTING”.
If you press
MENU/PRESET
on TV set for more than two
seconds during normal screen, the LANGUAGE mode
screen will appear.
Press
MENU/PRESET
again to display CH-SETTING menu.
• Pressing
MENU/PRESET
changes the screen as shown below.
#
Press
/
to display CH-SETTING
menu.
$
Press
CH
/
CH
to select desired setting.
%
Each time you press
/
, setting for
individual items changes as follows:
• POSITION
The channel position changes to the higher or lower number.
• COLOUR-SYSTEM
• SOUND-SYSTEM
• SKIP
ON
OFF
When set “SKIP” to “ON”, the channel number are set to SKIP. To turn off SKIP, press the number
buttons to select the desired channel and then set “SKIP” to “OFF”.
•
AUTO
Press
/
and Auto Channel Tuning is
started. Auto tuning bar will shown during Auto
Search only.
•
MANUAL (FINE tuning)
i) Each time
/
is pressed, the frequency
changes to allow fine tuning and the colour of channel
number changes to yellow to indicate fine tuning.
ii) Press
/
for more than 2 seconds, the
“Manual Channel Tuning” will start. If a signal is found,
the Manual Channel Tuning will stop searching.
•
BOOSTER
Picture quality may improve in regions with weak signal strength using this function.
• If ON is selected and the picture quality is still not good enough, please switch to ON .
• If signal strength is strong enough for the selected channel, the effect is negligible and may produce
instability. In such case select “OFF”.
^
Press
MENU
until normal screen appears.
POWER
SAVE
TV/VIDEO
SOUND MODE
SURROUND
NORMAL
1
2
3
4
5
6
7
8
0
9
MENU
B
A
C
D
LANGUAGE
CH
CH
CH
CH
MENU
ME NU
S OUND
P I C T UR E
F E A T UR E
T I ME R
C H - S E T T I NG
S E L E C T : C H
E N T E R :
R E T U RN : ME NU
A U T O
A U T O
1 2
O F F
1 6 8 . 2 5MH z
C H - S E T T I NG
C O L OUR - S Y S T EM
P O S I T I ON
S OUND - S Y S T E M
S K I P
A U T O
MA NU A L
L A NGU A G E
E NG
O F F
L I S H
S E L E C T : C H
A D J U S T :
R E T U RN : ME NU
B OOS T E R
AU T O
AU T O
1 2
O F F
1 6 8 . 2 5MH z
CH - S E T T I NG
C O L OUR - S Y S T EM
P O S I T I ON
S OUND - S Y S T EM
S K I P
A U T O
MA NU A L
L A NGUAG E
E NG L I S H
O F F
B OOS T E R
E8
CHANNEL SETTING
1 2
O F F
1 6 8 . 2 5MH z
CH - S E T T I NG
CO L OUR - S Y S T EM
PO S I T I ON
SOUND - S Y S T EM
S K I P
AU T O
MA NU A L
L A NGUAG E
E NG L I SH
AU T O
AU T O
O F F
B OOS T E R
• Pressing
NORMAL
while a PICTURE/SOUND selection is displayed, only the selected mode is reset to the standard
(factory-setting) position.
• Pressing
NORMAL
while the PICTURE/SOUND menu screen is displayed will reset all the items of PICTURE/SOUND
menu to the standard (factory-setting) position.
• Pressing
NORMAL
will reset all the items of PICTURE menu and SOUND menu to the standard (factory-setting) position.
S OUND
S URROUND
E P S
E QU A L I Z E R
B A L A N C E
1 5
A V L
ON
B A S S +
ON
S E L E C T : C H
A D J U S T :
R E T U RN : ME NU
Language
CH-Setting
Normal screen
MENU/PRESET
CH
CH
[ Behind the door ]
• AVL is advised to be set to “ON” when compact disk (CD) is being playback.
*1: SURROUND mode can be set between
(i) OFF EPS (While receiving signal from antenna)
(ii) OFF ESS (While receiving signal from AV input)
*2: Please see
E15
for details on Definition of Terms.
AUTO
SECAM
PAL
B/G
D/K
I
AUTO
ON
OFF
ON
• Switching COLOUR-SYSTEM:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving signal system and changes the
reception system of the TV set. When the picture is not stable, switching to an appropriate system may improve the picture quality.
• Switching SOUND-SYSTEM:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving signal system and changes the
reception system of the TV set. When the sound is not stable, switching to an appropriate system may improve the sound quality.
• When using FINE, the channel number changes from green to yellow.
→
←
→
←
29L-FG1BV[EN]3-4
17/7/06, 6:42 PM
4
