4-20
SENDING BY CHAIN DIALING
Number sequences entered using the numeric keys and/or one-touch keys can be linked together with pauses and
dialed as a single number.
For example when dialing an international number, tap the [Pause] key between the identification number of an
international telephone service company (e.g., "001") and the country code (e.g., "81" for Japan) to insert a pause for
smoother line connection.
The time (in seconds) set in [Pause Time Setting] of "Settings (administrator)" defines the length of pause.
On the screen, a hyphen "-" indicates a pause.
If two seconds are set in [Pause Time Setting], tapping the [Pause] key three times enters pauses for 6 seconds.
Example: Using chain dialing to dial an international number
• Addresses that can be selected are addresses that only have one fax address saved.
• After entering the number with the numeric keys, tap the [Pause] key to enter the next number with the numeric keys, or
tap the [Chain Dial] key on the action panel to select an address from the address book.
• After selecting the address from the address book, select [Chain Dial Combine with Direct Input] on the action panel to
enter the next number with the numeric keys, or [Chain Dial Combine with Address Book] to select an address from the
address book.
To set the length of pause:
In "Settings", select [System Settings]
→
[Image Send Settings]
→
[Fax Settings]
→
[Default Settings]
→
[Pause Time
Setting].
1
pause
Pause
010 1
212 xxxxxx
0
0
Numeric keys
Address book one-touch key
Country code of USA
Area code of New York City
Telephone number of other machine
