7-103
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is "On") and an Internet fax is received, this function
activates the machine and prints the fax.
When this function is disabled, received Internet faxes are not printed until the ([Power] button) is switched "On".
Initial File Format Setting
File Type
This is used to set the file type for Internet fax transmission.
The following settings can be configured.
• TIFF-S
• TIFF-F
If one of the following functions is set, the image will be sent in TIFF-F format even if TIFF-S is set.
• Mixed Size Orig.
• Dual Page Scan
• Book Divide
• Card Shot
• N-Up
Compression Mode
This is used to set the compression mode for Internet fax transmission.
The following settings can be configured.
• MH (G3)
• MMR (G4)
Speaker Volume Setting
Adjusts the volume of fax receive signals and communication error signals heard through the speaker.
A fax receive signal sounds after the machine checks the mail server and retrieves received faxes. A communication
error signal sounds when a delivery failed e-mail is received from the destination Internet fax machine.
Original Print on Transaction Report
When a transaction report is printed, this is used to print part of the first page of the transmitted original on the
transaction report. Select one of the settings below.
• Always Print
• Print at Error
• Do not Print
This setting will not be effective if the next "
Transaction Report Print Select Setting (page 7-104)
" is set to "Do not Print".
[MMR (G4)] cannot be selected when [File Type] is set to [TIFF-S].
