manualshive.com logo in svg

Sharp 3070N, User Manual

The Sharp 3070N User Manual is your comprehensive guide to maximize the potential of your device. Easily download your free manual from our website for step-by-step instructions, troubleshooting tips, and advanced features. Unlock the full power of the Sharp 3070N and enhance your user experience today.

Share
Download
background image

1-136

BEFORE USING THE MACHINE

►

PERIPHERAL DEVICES

EXTERNAL ACCOUNT APPLICATION

The external account module enables you to use an "external account application" for centralized account management 
of an MFP on a network.

An "external account application" can be used in "external authentication mode" or "external count mode".
When "external authentication mode" is used, the login screen is retrieved from the application when the machine is 
started. When a job ends, a job notification screen is sent to the application for counts by authenticated user. When 
"external count mode" is used, the login screen is not displayed when the machine is started. Only a job result 
notification is sent to the application. User authentication by the external account application cannot be used. However, 
the external account application can be used in combination with the internal account function.

External account application setup

After setting an external application in "Settings (administrator)", restart the machine to enable the setting.
To restart the machine, see "

TURNING ON THE POWER (page 1-10)

".

Operation in external account mode

The following describes operation in the two modes for using an external account application.

External authentication mode

When the machine is powered on in external authentication mode, the machine accesses the external account 
application and displays the login screen. The login screen also appears when the [Call] key is tapped to run a job in the 
job status complete screen. (The login screen does not appear if the user has already logged in by the normal method.)
Tap the job status display while the login screen is displayed, and the Job Status screen appears. To return to the 
previous screen, tap a mode select key.

If login fails:

If the login screen fails to appear or the application does not operate correctly, the machine may also stop operating 
correctly. In that case, terminate external account mode forcibly.

The External account module (MX-AMX3) is required to use these functions on the MX-3050N/MX-3550N/MX-4050N/
MX-5050N/MX-6050N.

To set up the external account application:

In "Settings (administrator)", select [System Settings] 

→

 [Sharp OSA Settings] 

→

 [External Accounting Application Settings].

To enable the external authentication mode:

In "Settings (administrator)", select [System Settings] 

→

 [Sharp OSA Settings] 

→

 [External Accounting Application Settings] 

and enable the [External Account Control] setting.

• The user control function of the machine cannot be used in external authentication mode.

However, "User Registration", "User Count Display", "User Count Reset", "User Information Print", and "The Number of 
User Name Displayed Setting" can be used.

• The mode select key cannot be used while the login screen appears.

To forcibly terminate the external account mode:

In "Settings  (Web version)", select [System Settings] 

→

 [Sharp OSA Settings] 

→

 [External Accounting Application Settings].

If termination in Setting mode (Web version) fails, terminate it forcibly on the operation panel of the machine.
In "Settings", select [System Settings] 

→

 [Sharp OSA Settings] and change the setting for [External Accounting Application 

Settings] and then restart the machine. To restart the machine, see "

TURNING ON THE POWER (page 1-10)

".

Summary of Contents for 3070N




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 3070N

LabelTac 4 Quick Start Manual preview
4
Brand: LabelTac Pages: 2
Dascom DP-520 User Manual preview
DP-520
Brand: Dascom Pages: 12
Dascom DP-510 Operator'S Manual preview
DP-510
Brand: Dascom Pages: 19
Dascom DC-7600 Assembly Instructions preview
DC-7600
Brand: Dascom Pages: 5
Panduit LS7 Operator'S Manual preview
LS7
Brand: Panduit Pages: 74
Tally T2380 Specifications preview
T2380
Brand: Tally Pages: 2
Tally Dascom DT-210 Programmer'S Manual preview
DT-210
Brand: Tally Dascom Pages: 57
Fenix SM2000 Operation Manual preview
SM2000
Brand: Fenix Pages: 65
Variquest Perfecta 3600STP Assembly Instructions Manual preview
Perfecta 3600STP
Brand: Variquest Pages: 12
Variquest Perfecta 3600STP User Manual preview
Perfecta 3600STP
Brand: Variquest Pages: 231
Variquest Awards Maker 400 Instructions preview
Awards Maker 400
Brand: Variquest Pages: 4
Felix printers FELIX Pro L Quick Start Manual preview
FELIX Pro L
Brand: Felix printers Pages: 26
Xerox B305 Quick Reference Manual preview
B305
Brand: Xerox Pages: 20
Oki MPS6500b User Manual preview
MPS6500b
Brand: Oki Pages: 132
Epson DS-510 User Manual preview
DS-510
Brand: Epson Pages: 89
Epson EasyFlow WorkForce 30 Quick Start Manual preview
EasyFlow WorkForce 30
Brand: Epson Pages: 2
Epson DS-50000 WorkForce DS-50000 User Manual preview
DS-50000 WorkForce DS-50000
Brand: Epson Pages: 91
Epson EC-01 Setup Manual preview
EC-01
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands