4-76
SENDING A LARGE NUMBER OF PAGES (JOB BUILD)
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic
document feeder, and transmit the pages in a single transmission. You can also send a fax by placing originals in both
the automatic document feeder and on the document glass. Use this function when there are more original pages than
can be placed at once in the automatic document feeder. When scanning originals that are separated into sets, scan the
set that has the first page first. The settings that you select for the first set can be used for all remaining sets.
This function is not available for Quick On Line Sending, manual transmission, Direct TX, or transmission using the speaker.
• If you are going to change all original settings, select the settings before scanning the original.
• Up to 999 pages can be scanned. Note that when the memory is being used for other jobs, fewer pages can be scanned.
• If the memory becomes full during scanning, a message will appear and the transmission will be canceled.
• The scan settings can be changed for each set of originals.
1
Place the original in the document
feeder tray of the automatic document
feeder.
Insert the originals all the way into the document feeder tray.
Originals can be stacked up to the indicator line.
Originals can also be placed on the document glass.
►
AUTOMATIC DOCUMENT FEEDER (page 1-78)
2
Enter the destination fax number.
• Entering a destination number using the numeric keys
• Retrieving a destination from an address book
• Using a search number to retrieve a destination
• Retrieving a destination from a global address book
• Using a transmission log to resend
1
1
101
1
Originals
Originals are scanned in
separate sets.
Indicator line
