4-120
CONNECTING AN EXTERNAL TELEPHONE
CONNECTING AN EXTENSION TELEPHONE
You can connect an existing telephone to the machine.
The telephone can be used for voice calls and to start fax reception on the machine. Connect the extension telephone as shown
below. After connecting an extension telephone, configure the "External Telephone Setting" in setting mode (administrator).
USING AN EXTERNAL TELEPHONE
Enable the "Tel/Fax Auto Change" function. This is useful as the telephone or fax operation is selected automatically
according to the calling.
• You cannot send a fax from your telephone.
• You can connect a telephone with a modular cable plug to your machine. Also, use the two-wire cable for telephone
connection. If another type of cable is used, the telephone may not operate normally.
• If the plug on the telephone line cord does not fit into the jack on your extension phone, contact your dealer or nearest
SHARP Service Department.
Extension telephone jack
Click!
Existing extension telephone (example)
Click!
