9
9
Important – Only use the screws provided to mount the set onto a wall bracket. When using a wall
bracket, please ensure the screws in the back of the TV set are not over tightened. Failure to use the
correct screws may lead to damage.
Securing the TV to a wall/wall mounting
SECURING THE TV TO A WALL
When mounting your set onto a wall bracket and installing a set with rear pointing connectors, it may
be necessary to stand the set off the wall to allow any leads connected to the rear of the set to fi t
correctly. To facilitate this, spacers and longer screws are included in the accessory pack to increase the
gap between the wall bracket and set. These parts are as shown below:
4 x Screw including washer
4 x Spacer
These should be used as indicated in the picture below. Ensure that the screws are not overtightened as
this may cause damage to the set.
Note:
the wall bracket type
shown in the diagram is
for illustration purposes
only, other brackets may be
used and it is recommended
that the spacers and screws
are tested to see if they fi t
correctly before fi nal assembly.
UNI - User Guide - Sharp SMART UHD LED TV with Freeview HD models wall mount design.indd Sec1:9
UNI - User Guide - Sharp SMART UHD LED TV with Freeview HD models wall mount design.indd Sec1:9
27/08/2019 10:06:47
27/08/2019 10:06:47