Sharp 4T-C60AH1X, Service Manual

4T-C6070AH1X

5 – 17

11.INPUT MODE START 

• 

•  

•  

• 

12.INPUT MODE FIXED 

-

•    

•

•

• With the execution of hotel mode, the input source is forced to change to that set by “ inupt mode
   starts” and the channel switching and input switching are prohibited there after.

   Variable   

       : When “ INPUT MODE START ” is active, it impossible to switch to anothe channel
          or input.   

• The following keys are invalidated.

   CH 

 , 

 *

 However, the keys ( input switching and  CH             keys ) of the unit for menu operation remain valid.

• 

13. 232C POWON 

• 

• 

      DISABLE        

14. PICTURE IMPORT 

RS-232 power ON command “ POWR̲̲̲

   "

•

•

15.START UP SCREEN 

•

•

•

      - 

      -

      -

• 

• 1

~

180         

• 

• 

• 

None

Selection
Default

Explanation

About option

Limit in setting

Exception
Remarks

Selection between “ Normal ” or “ input source 1 ( input seelction or channel )” . ( loop provide.
Normal

In power-ON, the input source to be started or channel can be set.

( In standard mode, the operation follows the last memory )

All the input source in the model are made selectable.
When the input/output switchable input source is selcted and the input source is set to output, the setting of
inpit/output switching is changed to input at the execution of hotel menu. In addition, the input/output
switching by menu is prohibited.

In TV mode, the display of all channels is stopped and it is treated as an input source. At this time, the channel

to be set follows the last memory  and the content of the last memory is included in the natation by

option. Ex.) TV ( CH2 ), TV ( CH4 ) etc.

The order of appearance of option in the hotelmenu should agree with order toggles by input swithcing key.

. The display of channel setting menu and the channel setting operation are prohibited ( except for MCL )

In setting at “ Normal ”, the setting of “ input modefixed ” is changed to “ Variable ” and selection should 

be prohibited.

Selection
Default

Explanation

Limit in setting

Exception

Remarks

Selection between “ Variable ” and “ Fixed “ ( loop provide )

( Variable )

: If [ INPUT MODE START ] is set to normal, input mode is not fixed.

Fixed

direct tuning button, FLASHBACk, input

None

In the following case, setting is cancelled and mode is changed  to “ Variable ”.

1) When the setting of  “ input mode start ” is set to “ Stardand ( Normal )”.

Selection
Default
Explanation

Limit in setting
Exception

Remarks

“ Enable ” and “ Disable ”

Disable
The item decide whether Power ON by the 232C command is enable /disabled in the standby state.

ENABLE

: POWR0001is always enabled.
: Start-up may be impossible at POWR0001.
( if the 232C command reception  module is set to OFF, the command is invalid).

None

None

Option 

Default

Explanation

Limit in setting

Exception
Remarks

“ Off ” or “ On ” ( loop enabled )

Off

To imported picturefrom USB and strored to TV’s flash memory.

None
None

If “ PUBLIC.JPEG ”name file under 4Mn in USB memory. A imported picture is stored to TV’s flash memory. then display “OK”

If “ PUBLIC.JPEG ” name file over 4Mb in USB memory. Don’t import picture. And TV’s flash does not change. Then display “ ERR ”

If “ PUBLIC.JPEG ” name file ob in USB memory or no “ PUBLIC. JPEG ” file in USB memory, TV’s flash memory erase.  Then dispaly “DEL”

If remove USB memory before finished stored image, don’t  import picture. And TV’s flash does not change, Then display “ERR”

If no insert USB memory, don’t import picture. And TV’s flash memory  does not change. the dispaly “ ERR ”.

Option

Default

Explanation

Remarks

“ Off ”, “ 1 ~ 180” ( loop enabled )

Off

Off 

: Cannot setup picture display time.
: To make user can setup picture display time. The range is 1 second to 180 seconds.

If “ START UP SCREEN ” item is 1 ~ 180.

When Tv power ON from deep standby, power off or AC off mode, TV needs to display PUBLIC picture for setting time

When TV power ON from standby mode, TV needn’t to display PUBLIC picture.
When displaying PUBLIC picture, a ket input :

Input key is RC Power key : TV change to standby mode.

Input key is panel Power key : TV change to power off mode.

Other keys ( RC/ Panel ): No operation

4 - 18